專業POCKELS CELLS廠商

Pockels cells are used in a variety of laser modulation applications benefitting from rapid/dynamic polarization control, Q-switching, light intensity control, intensity-modulation, dynamic waveplates,

dynamic coupling of light in out of optical systems and light switching.

Why chose G&H as your Pockels cell partner?

We offer:

You will find Pockels cells in a wide range of applications including medical and aesthetic laser

systems, CO2 lasers, petawatt lasers, regenerative amplifiers, laser fusion systems, optical

switches, light intensity modulators, materials processing, e.g. marking, metal annealing,

micro-machining, quantum key distribution, range-finding, lidar, target designating,

multi-photon microscopy.

G&H Cleveland has since its start in 1973 focused on delivering customers the highest quality

electro-optic technology based on world class, cutting-edge optical crystalline materials, optical

frequency conversion, and precision-engineered electro-optical devices for laser systems

applications. We manufacture a comprehensive range of high-end market leading Pockels cells.

Over decades we have developed and refined product range, for wavelengths ranging from the

UV to the IR (200 nm-12 μm).

What are the key considerations when choosing a Pockels cell?

Key considerations are:

Once the Pockels cell with the required properties has been selected it is time to choose the

corresponding Pockels cell driver.

Intrinsic contrast and voltage contrast ratio

Since Pockels cells are often used inside a laser cavity to flip the polarization of the laser light

between S- and P- polarization to allow for high loss when pumping the gain media and low loss

when coupling the light out of the laser cavity, the ICR and VCR are two of the most important

parameters. To get a high inversion of the gain media the ICR needs to be as high as possible –

and when light is coupled out of the laser cavity – the VCR should be as high as possible.Higher

contrast ratios in combination with low loss will result in better laser performance.

When designing Pockels cells the ultimate ICR and VCR are determined by the crystal itself.

Stress that is put on the crystal during the manufacturing will degrade the ICR and the VCR. The

combination of ICR and VCR provides the indication of actual performance.

For a typical high end Pockels cell using 99% KD*P you should expect:

Longitudinal and transverse driven Pockel cells

Utilizing proprietary crystal growth, fabrication, and polishing techniques we manufacture both

longitudinal and transverse electrode configuration Pockels cells in beta barium oxide (BBO),

cadmium telluride (CdTe), potassium dihydrogen phosphate (KDP) and the highest grade, 99%,

potassium dideuterium phosphate (KD*P/DKDP).

Longitudinally driven crystals

Longitudinally driven crystals benefit from the drive voltage being independent of aperture size,

allowing larger apertures to be realized. In order to avoid obstructing the aperture with the

electrodes, G&H uses cylindrical ring electrodes on the circumference of the crystal. KDP/KD*P

(Potassium Dihydrogen Phosphate/Potassium Dideuterium Phosphate) Pockels cells use this

design (QX, Centaur CQX, Impact, and TX series cells)

Transversely driven cells

Transversely driven crystals benefit from the electrodes not being in the path of the light, and the

driving voltage required to achieve half-wave voltage increases with the crystal aperture size,

as well as depending upon the crystal geometry. This can reduce system complexity and size

because the half-wave voltage can be lowered by reducing the distance between electrodes,

or using a longer crystal. BBO (Beta-barium borate) and CdTe (Cadmium telluride) Pockels cells

utilize this design (Chiron and IRX series cells)

Browse the range below or get in touch for a quote or to discuss a custom product.