專業8MTL1401-300 - Direct Drive Linear Translation Stage廠商

		Travel range: 300
		Resolution: up to 50 nm and better
		Bidirectional repeatability: +/- 0.5 µm
		Maximum velocity: 1200 mm/s
		High resolution non-contact optical incremental encoder
		Direct drive zero backlash system
		High accuracy linear guide and carriage system
		Long life performance guaranteed
		Easy integration with opto-mechanical systems
		Sophisticated and flexible control and drive system

Direct Drive Linear Translation Stage of series 8MTL are based on 3 phase ironless linear brushless servo motor technology. Direct drive technology allows the user to reach zero-backlash motion with high accuracy, repeatability, and low friction.

A Linear optical encoder as a feedback system guarantees direct control of position with asub-nanometer resolution of the motion.

Naturally aged aluminum alloyguarantees high-temperature stability, a softness of 8MTL instruments and excellent long period kinematics without drift of guide system.

Translation stages of series 8MTL can be prepared for clean rooms and vacuum up to 10^-3 torr. An additional requirement of cleanliness could be requested separately.

Motorized translation stage can be easily connected to the optical table directly using standard 3STS screws. XY scanning stages can be directly assembled without using any connecting plates. Vertical Z translation can be requested separately.

Motion control of 8MTL series translation stages is available with Standa controller.

Specifications Kinematics & Feedback information   Travel range 300 mm *Encoder type Non-Contact  Optical Encoder Encoder model LEn1 *Encoder resolution On request (up to 50 nm or better) Reference mark in the center of travel Bidirectional repeatability ±0.5 µm Unidirectional repeatability On request Accuracy   **Non-calibrated On request Calibrated ±1 µm ***Pitch ±82 µrad ***Yaw ±24 µrad ***Roll On request ****Maximal speed (not loaded) 1.2 m/s ****Maximum acceleration (not loaded) 1.45 g Limit Switches Hall sensors Switch polarity Pushed is closed Load & Transmission information   Continues force (peak) 113.5 N Load capacity (central) 30 kg Linear motor model LM1 Motor 3 Phase BLDC  linear servo motor Maximum Bus Voltage >300 VDC Continues Current 2.2 A Peak current 8.8 A Guiding system Recirculating linear rails and carriages Material Base material Aluminum alloy Finish Black anodizing Control & Communication   *****Recommended controllers SPiiPlusEC *****Recommended drivers UDMlc Recommended power supply PUP120-17 Cable length On request Accessories Information   Base plate Not necessary XY configuration Direct Z configuration Available Additional Details   Moving platform dimensions 140x140 mm Measurement system Metric Weight 6.75 kg Moving mass 1.2 kg

Printable version

View drawings

Download 3D